Annco - Carrocerķas y Volcadores
Idioma - Español
Español
English Idiom
English
Italian - Idiom
Italian
Company Profile Products Location Contact Picture Gallery

Products
Fixed Bodies
Dump Bodies
Recovery Bodies
Uplift Plate
Minimixer
Container Delivery
Aircraft Supplying
Roll On Roll Off
Dump Containers
Trailers
Parts and Accesories
Hoists

Products
BACK <<
| Dump Bodies
 

Rear Dump

Standard bodies, capacity: 12 tons, 55° dump angle. System of twin arms actuated by an 8-inch hydraulic cylinder.  Pump, power output and pneumatic commands inside the cabin.  These bodies have fold-down rails suitable for pallets; alternative fixed rail for dry goods.

Rear Dump

30-ton bodies with hydraulic system made up of a front telescopic cylinder, power output, pump and pneumatic commands inside the cabin.  These bodies are equipped with stabilising scissors and a tubular dump rod; 55° dump angle.

Triple Dump

14-ton capacity body equipped with hydraulic system made up of a tip-up mounting telescopic cylinder, suitable for side and rear drop.  It also has power output, pump and pneumatic commands inside the cabin.  55° rear dump angle and 45° side dump angle.

Double Side Dump

16-ton capacity bodies, 45° dump angle, actuated by two telescopic cylinders. Power output, hydraulic pump and pneumatic commands inside the cabin.  Fold-down rails suitable for pallets; optional deflection wings for dry goods.

Trailers

Double side dump tipper with a 35-ton capacity. Hydraulic system made up of four telescopic cylinders. Fold-down rails for pallets or with deflection wings for dry goods. 45° dump angle.

Semitrailers – Tray  (Rear Dump)

40-ton capacity.  Rear dump bodies actuated by means of a front telescopic cylinder and stabilising mechanism articulated in chassis and body. Dump angle: 50°.

Semitrailers – Tray  (Double Side Dump)

Double side dump bodies with a 35-ton capacity.  Actuated by means of 5 telescopic cylinders.  Fold-down rails suitable for pallets or with deflection wings for dry goods.  Dump angle: 50º.



NOTE

Paintwok: All the bodies mentioned above have been previously treated with phosphate, deoxidising, two layers of antirust and three layers of choice colour paint.

Accesories: All the boides have toolbox, spare wheel compartment, mud flaps and rear bumper.

 
ANNCO SRL - CARROCERIAS Y VOLCADORES
Av. Camargo 1974/76/78 - B1686HSP - Hurlingham - Buenos Aires - Argentina
Tel./Fax.: 4665-3003 - annco@annco.com.ar